A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers          下载免费PDF全文

Benoît Dewandel  Yvan Caballero  Jérôme Perrin  Alexandre Boisson  Fabrice Dazin  Sylvain Ferrant  Subash Chandra  Jean‐Christophe Maréchal 《水文研究》2017,31(12):2277-2295

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.  相似文献   

The effective stress concept and the evaluation of changes in pore air pressure under jacketed isotropic compression tests for dry sand based on the 2‐phase porous theory          下载免费PDF全文

Sayuri Kimoto  Fusao Oka  Yasuhiro Morimoto 《国际地质力学数值与分析法杂志》2017,41(18):1894-1907

The effective stress concept for solid‐fluid 2‐phase media was revisited in this work. In particular, the effects of the compressibility of both the pore fluid and the soil particles were studied under 3 different conditions, i.e., undrained, drained, and unjacketed conditions based on a Biot‐type theory for 2‐phase porous media. It was confirmed that Terzaghi effective stress holds at the moment when soil grains are assumed to be incompressible and when the compressibility of the pore fluid is small enough compared to that of the soil skeleton. Then, isotropic compression tests for dry sand under undrained conditions were conducted within the triaxial apparatus in which the changes in the pore air pressure could be measured. The ratio of the increment in the cell pressure to the increment in the pore air pressure, m, corresponds to the inverse of the B value by Bishop and was obtained during the step loading of the cell pressure. In addition, the m values were evaluated by comparing them with theoretically obtained values based on the solid‐fluid 2‐phase mixture theory. The experimental m values were close to the theoretical values, as they were in the range of approximately 40 to 185, depending on the cell pressure. Finally, it was found that the soil material with a highly compressible pore fluid, such as air, must be analyzed with the multi‐phase porous mixture theory. However, Terzaghi effective stress is practically applicable when the compressibilities of both the soil particles and the pore fluid are small enough compared to that of the soil skeleton.  相似文献   

On the dependence of the saturated hydraulic conductivity upon the effective porosity through a power law model at different scales          下载免费PDF全文

Carmine Fallico  Samuele De Bartolo  Massimo Veltri  Gerardo Severino 《水文研究》2016,30(13):2366-2372

We study the scale dependence of the saturated hydraulic conductivity K_s through the effective porosity n_e by means of a newly developed power‐law model (PLM) which allows to use simultaneously measurements at different scales. The model is expressed as product between a single PLM (capturing the impact of the dominating scale) and a characteristic function κ^? accounting for the correction because of the other scale(s). The simple (closed form) expression of the κ^?‐function enables one to easily identify the scales which are relevant for K_s. The proposed model is then applied to a set of real data taken at the experimental site of Montalto Uffugo (Italy), and we show that in this case two (i.e. laboratory and field) scales appear to be the main ones. The implications toward an important application (solute transport) in Hydrology are finally discussed. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

O₂-O₂云反演算法及其在TROPOMI上的应用     

张文强  刘诚  郝楠  Gimeno Garcia Sebastian  邢成志  张成歆  苏文静  刘建国 《遥感学报》2020,24(11):1363-1378

利用遥感技术对大气环境污染进行监测时，云是影响痕量气体反演精度的重要因素，因此在痕量气体反演中需要对云的影响进行校正，通常使用的云参数主要是有效云量和云压。本文基于O₂-O₂ 477 nm吸收波段构建了O₂-O₂云反演算法：首先，根据有效云量和云高与连续反射率和O₂-O₂斜柱浓度之间的对应关系，结合假定的云模型利用VLIDORT辐射传输模型建立关于有效云量和云压的查找表；然后，通过差分吸收光谱技术拟合卫星载荷观测的大气层顶辐射，获得O₂-O₂斜柱浓度并计算连续反射率；最后，结合辅助数据，根据查找表进行插值反演获得有效云量和云压。通过将算法应用到OMI观测数据，将反演结果与OMCLDO2产品进行对比验证，有效云量和云压空间分布一致，相关系数R均超过0.97；并还将该算法应用于下一代大气成分监测仪器TROPOMI，与FRESCO+产品对比，有效云量和云压空间分布基本一致，当地表类型为海洋时，有效云量相关系数R大于0.97，云压相关系数R大于0.94，云压反演结果存在一定的区别；通过将O₂-O₂云反演算法和FRESCO+云压反演结果与CALIOP Cloud Layer产品进行对比，结果表明，在低云情况下，O₂-O₂云反演算法线性回归方程斜率为0.782，截距为198.0 hPa，相关系数R为0.850，算法表现优于FRESCO+。而在高云情况下，FRESCO+反演结果更接近CALIOP云压结果。在OMI和TROPOMI上的应用表明O₂-O₂云反演算法在大气云反演中具有较高的准确性和可行性，可以为大气痕量气体反演的校正提供云参数，并为中国同类型卫星载荷的云反演算法提供算法参考。  相似文献   

A smoothed cap model for variably saturated soils and its robust numerical implementation          下载免费PDF全文

P. Gamnitzer  G. Hofstetter 《国际地质力学数值与分析法杂志》2015,39(12):1276-1303

This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils     

David Mašín 《国际地质力学数值与分析法杂志》2010,34(1):73-90

The paper presents an approach to predicting variation of a degree of saturation in unsaturated soils with void ratio and suction. The approach is based on the effective stress principle for unsaturated soils and several underlying assumptions. It focuses on the main drying and wetting processes and does not incorporate the effects of hydraulic hysteresis. It leads to the dependency of water retention curve (WRC) on void ratio, which does not require any material parameters apart from the parameters specifying WRC for the reference void ratio. Its validity is demonstrated by comparing predictions with the experimental data on four different soils taken over from the literature. Good correlation between the measured and predicted behaviour indirectly supports applicability of the effective stress principle for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates     

J. Mertens  H. Madsen  M. Kristensen  D. Jacques  J. Feyen 《水文研究》2005,19(8):1611-1633

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

A modeling study of effective radiative forcing and climate response due to tropospheric ozone     

Bing Xie  Hua Zhang  Zhili Wang  Shuyun Zhao  Qiang Fu 《大气科学进展》2016,33(7):819-828

This study simulates the effective radiative forcing(ERF) of tropospheric ozone from 1850 to 2013 and its effects on global climate using an aerosol–climate coupled model, BCC AGCM2.0.1 CUACE/Aero, in combination with OMI(Ozone Monitoring Instrument) satellite ozone data. According to the OMI observations, the global annual mean tropospheric column ozone(TCO) was 33.9 DU in 2013, and the largest TCO was distributed in the belts between 30°N and 45°N and at approximately 30°S; the annual mean TCO was higher in the Northern Hemisphere than that in the Southern Hemisphere;and in boreal summer and autumn, the global mean TCO was higher than in winter and spring. The simulated ERF due to the change in tropospheric ozone concentration from 1850 to 2013 was 0.46 W m~(-2), thereby causing an increase in the global annual mean surface temperature by 0.36℃, and precipitation by 0.02 mm d~(-1)(the increase of surface temperature had a significance level above 95%). The surface temperature was increased more obviously over the high latitudes in both hemispheres, with the maximum exceeding 1.4?C in Siberia. There were opposite changes in precipitation near the equator,with an increase of 0.5 mm d~(-1)near the Hawaiian Islands and a decrease of about-0.6 mm d~(-1)near the middle of the Indian Ocean.  相似文献   

毫米波雷达与无线电探空对云垂直结构探测的一致性分析   总被引：5，自引：0，他引：5       下载免费PDF全文

王喆  王振会  曹晓钟 《Acta Meteorologica Sinica》2016,74(5):815-826

在众多种针对云垂直结构的探测中,毫米波雷达可获取云底、云顶、云厚等完整的云垂直结构信息,并可以连续监测云的垂直剖面变化,是有力的探测手段之一。而无线电探空因其直接的测量优势,能直观、确切地描述大气湿度垂直结构,可将其进一步处理生成云垂直结构信息,并作为一种数据源用于与毫米波雷达云垂直结构探测结果进行比对,以评估毫米波雷达针对云宏观垂直结构的探测性能,为毫米波雷达更好地应用于云探测提供参考。通过获取位于北京南郊观象台的毫米波雷达2014年10月28日至2015年2月17日长达113天连续观测的反射率因子以及探空温、压、湿数据,设计或选取合适的方法对二者进行云边界的计算,并进行云高（包括云底高和云顶高）以及云层数的一致性比对分析。结果认为,除对于高层云的云顶高度毫米波雷达由于探测限制不能探测到10 km以上的云顶,某些时刻与探空产生较大差异外,在云底高度以及中低云的云顶高度上可以与探空观测取得很好的匹配效果,对于云的垂直分层上二者也有较强的一致性。该毫米波雷达具有较为准确并连续刻画10 km以下云垂直结构的能力。  相似文献   

气候模式中云的垂直重叠及其辐射传输问题研究进展          下载免费PDF全文

李林涛 《Acta Meteorologica Sinica》2016,74(1):103-113

概述了全球气候模式中云的垂直重叠的处理方法及其辐射物理过程的最新研究进展。从云垂直重叠模型的构造、模型在气候模式中的实现方式,得到与观测一致的云重叠结构所采用的数据和方法、重叠云的辐射传输等方面,给出了针对这一国际研究难点问题的最新研究进展。关于气候模式中云的垂直重叠问题的研究至今已取得了许多成果,表现在:重叠模型上有了更为科学的描述形式(如指数衰减重叠);重叠云的辐射传输也有了更快速的处理方法(如蒙特卡洛独立柱近似)并被广泛应用;连续的三维云遥感观测(如CloudSat/CALIPSO)和云分辨尺度的三维云模式的发展为在气候模式中精确描述云的垂直结构提供了丰富的观测资料和模式数据。但是,气候模式中现有的云重叠结构处理及其辐射传输方法还远不够完善,仍然存在很多没有解决的问题需要在未来进行探索。  相似文献